Appleton™ ATX™ RE Series Recessed and Surface Mounting Fluorescent Luminaires

The ATX™ RE Series of fluorescent luminaires are specifically engineered for clean-rooms and other sensitive environments that place strict demands on equipment and personnel. They are designed to keep these locations running safely and efficiently. Flush and surface mounting designs allow for a seamless installation that prevents contaminant accumulation and growth. The one-piece welded steel housing features a white powder epoxy coat finish and gasketed safety lens that stands up to years of caustic chemical hosedowns and extreme temperature variations. Sealed internals, a positive safety switch and Ex e battery back-up provide uncompromising safety in Zone 1, 2, 21 and 22 hazardous environments.


  • Typical applications include: the food industry, chemical plants, pharmaceuticals and delicate electronic manufacturing such as the aerospace industry. They are ideal for use in rigorous corrosive environments, involving water, dust and extreme temperatu
  • One piece welded steel housing with integral frame to seal out contaminants
  • Frameless tempered 5 mm (1/4 in) thick lens secures to housing by internal metallic hinges. It is secured with captive 316L stainless steel screws that allow for easy lamp replacement and fixture maintenance
  • Bi-pin G13 lampholder
  • Positive safety switch and Ex e battery with plug-in connector for safety and easy maintenance in hazardous locations
  • Recessed version allows mounting in permanent ceilings from 55 mm to 130 mm (2.17 to 5.12 in)
  • Available in surface mounting version
  • Ballast features EOL (End Of Life) protection in accordance to the latest EN 60079-7 standard; multi-tap voltage (110 to 254 Vac/Vdc +/-10% 50/60 Hz); two channel standard ballast (if one lamp fails the second lamp remains in operation); Ex e plug-in con
  • Three Cable entries for M20 cable gland. Supplied with M20 polyamide cable gland for 6.5 to 14.5 mm (0.26 to 0.57 in) cable diameter and M20 polyamide blanking plug and one M6 earth stud


ATEX/IECEx Certifications and Compliances
Zone 1 and 2 – 21 and 22; Ex II 2 GD; IP66; IK09/10
Specific Wattages
2 x 18 W; 2 x 18 W Emergency; 3 x 18 W; 4 x 18 W; 2 x 36 W; 2 x 36 W Emergency; 3 x 36 W; 4 x 36 W; 2 x 58 W; 2 x 58 W Emergency; 3 x 58 W; 4 x 58 W
Ambient Temperature
-20 °C ? to ? +55 °C (-4 °F ? to ?+131 °F)
Standard Materials and Finishes
One piece steel housing and integral frame with powder epoxy paint; silicone gasket; tempered safety lens; polycarbonate internal reflector; polyamide cable gland and blanking plug
Battery Back-Up Options
3 hour emergency version with 6 V – 4 Ah battery. 1 hour 30 emergency (combined) with 6 V – 7 Ah battery. 3 hour emergency (combined) with 6 V – 7 Ah battery
Glodok Exproof Product