Applications
•  Designed to supply power to portable or fixed electrical
equipment such as motor generator units, welders, pumps,
compressors, cellular relay stations, SCR/VFD houses, and
similar equipment.
•  Ideal for use in “ship to shore” and backup/temporary power
applications.
•  Suitable for use in locations where a weatherproof enclosure
is required.
•  Rough usage construction.
Features
•  Available in 30, 60, 100, 150, 200, and 400 Amp units.
•  Available in two grounding styles: Style 1 (shell only) and
Style 2 (shell and extra pole).
•  Neoprene bushing compressed by cable collar prevents
entrance of water. Bushing is highly resistant to hydrocarbon
deterioration and is self-extinguishing.
•  Locking screw and slot prevents plug cable collar from
”backing off.”
• Contacts exert constant pressure along entire contact surface
and provide electrical continuity.
• Ambient temperature range of -25°C to +40°C
(-13°F to +104°F).
• Insulating blocks provide greatest dielectric and mechanical
strength and lowest arc tracking.
• Positive polarization: only plugs and receptacles of same style,
number of poles and ampere rating can be used together.
• Circuit breaking: in 30, 60, 100, 150 and 200 Amp units, any
arcing created as line and load terminals disengage is safely
confined deep within terminal cavities. Plugs may be withdrawn
in an emergency under full rated loads without separate
disconnect switches (400 Amp plug is for disconnecting use
only; not for current rupturing).
• 30, 60, 100, and 150 Amp Powertite™ plugs also suitable for
classified locations when used with Appleton EBR, EBRH, JBR,
MD2SR, or DBR explosionproof interlocking receptacles.
• Controlled length contacts ensure that ground makes first and
breaks last for added safety.
• Intermatability : Intermateable with Crouse-Hinds  Arktite®
and Powermate™, and Killark  Versamate®.